Here are the Answers to the Most Common Questions Plumbers Get

Posted on May 27, 2022 by weilhammerplumbing

Plumbers have heard and seen it all, from haunted plumbing pipes to a dead rat in the drain, and everything in between. But there are some questions that tend to take the lead in terms of frequency. If you have questions about your plumbing situation, it is likely that one of these answers will help you. Scroll below to review the answers to the most common questions plumbers get.

Emergency Plumber Indianapolis Indiana 317-784-1870

Plumbing Questions and Answers

Is This a Plumbing Emergency?

When a client first calls, they often ask if their plumbing issue is something that needs immediate attention or if it can wait. Plumbing emergencies are often easy to spot, as they tend to pose a long list of potential damages and hazards. Some common tell-tale plumbing emergencies include a burst pipe, flooding, major water leak that cannot be controlled by turning off the main water supply, or gas leak. But plumbing emergencies can also come in not-so-obvious forms. For instance, if your home only has one toilet and that toilet breaks down, repairing it would be an emergency need, otherwise, you will have to use the bathroom somewhere else or get a hotel.

Examples of non-emergencies include clogged drains, no hot water, clogged toilet, overflowing toilet, dripping faucet, broken fixtures, and small water leaks.

Is This Plumbing Repair Covered Under Insurance?

Another initial question plumbing customers tend to ask has to do with insurance coverage. Each homeowners’ insurance policy is different, and therefore, contains varying degrees of coverage depending on the type of plumbing repair or need. It is important to check with your insurance carrier to verify which types of repairs are covered and which must be paid out of pocket.

Do I Need to Replace My Water Heater? My Water Softener?

When people start to experience problems with their water heaters or water softeners, the first question that often arises is whether or not they will have to replace them. Water heaters are designed to last anywhere from 8 to 10 years; so, if your unit is near or approaching that range, it would be wise to start thinking about an upgrade. Water softeners last a bit longer, ranging between an 8 to 15 year lifespan. So, if your water softener has not been replaced in a decade, an upgrade to a modern model would be wise.

Aside from age, water heaters and water softeners can experience damage that requires them to be replaced prematurely. Common irreparable damages include fires, burning, or smoke production, as well as gas leaks, major water leaks, tank ruptures, and electrical damage. If your water heater has shown signs of these types of damages or issues, contact an emergency plumber in Indianapolis, right away.

Why Does My Water Take So Long to Heat Up?

Hot showers and baths are an essential part of a satisfying quality of life. So, when they start to show signs of problems, many people start calling their plumbers. One of the most common questions is, “why does it take so long for my water to heat up?” The answer is the water, either the location, size, or efficiency.

If your water heater is too far away from your point of demand, in this case your shower or bathtub, the water can take longer to heat up compared to the kitchen sink faucet. The solution here would be to install a secondary, perhaps tankless or electric, water heater closer to the location of your shower or bath.

If your water heater is too small for the size and occupancy of your home, you can certainly expect the water to take longer to heat up to the temperature you’ve demanded. If you have recently taken in new guests or tenants, you might experience this issue. If you just moved in, you need to upgrade to a higher capacity water heater.

If your water heater is experiencing malfunctions, it may not perform as well as it should. It could cause your water to heat up slower than before.

Can I Improve the Water Pressure?

Everyone asks the plumber about water pressure. Low water pressure is not desirable, so customers always want to know how they can increase or improve the water pressure in their home. One place to focus your attention on when it comes to low water pressure is the faucets themselves. You may have low flow volume restrictors that limit the pressure delivered in the showerhead or faucet. Corroded or leaky plumbing pipes are the next two common culprits behind low or lowered water pressure.

What’s Causing These White Spots All Over My Glassware and Shower Stall?

Cloudy, spotty glassware and shower stall doors are not fun to look at. That is why so many plumbing customers ask their plumbers why this is happening. The answer is hard water. Hard water contains dissolved minerals that leave behind scale and scum. To treat a hard water problem, install or upgrade your water softener. You may also consider a reverse osmosis system.

Do you have additional plumbing questions and concerns that you want immediate answers to? Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing service and repair in Indianapolis, Indiana and its surrounding counties. We serve residential and commercial clients.

What is the Hardness Level of Well Water?

Posted on May 24, 2022 by weilhammerplumbing

Are you on the market for a new home or business location? Do some of these properties operate on well water? Perhaps you are considering the addition of a well water system to your current home or office? If so, you are likely filled with all sorts of well water questions, namely about hardness. Continue reading to learn whether well water is hard or soft, plus how to test for and get rid of hard water.

Well Water Softening Indianapolis Indiana Well Water Softening Indianapolis Indiana

Well Water Comes From the Ground

Rain falls from the skies as naturally softened water. Once it permeates the varying layers of soil, sand, aggregate, bedrock, and more, it accumulated hard solids and minerals, like calcium, magnesium, and iron. Seeing as though well water is generally sourced from a natural or man-made water table beneath the ground, you can safely assume that well water is harder than your standard, municipal tap water.

Hard water cannot always be seen by the naked eye, but you can often spot the signs. Hard water causes limescale buildup around plumbing fixtures like drains and faucets. Water can appear cloudy or have a metallic taste. Dishes tend to accumulate spots or look cloudy after washing them. Laundry and bathing can feel less effectual because hard water does not rather or rinse well. Hair can feel dry or dingy. Skin can feel itchy and dry. There are many signs of hard water. But the guaranteed way to know is through hard water testing.

Testing Well Water Hardness

It is important to test well water for hardness. The level of water hardness varies, regionally. One town might have naturally-softer water than the town next door, and so forth. Testing well water is an important part of the hard water solution process, but also for ensuring safe drinking water.

You can contact your local Indianapolis soft water plumber to schedule an on-site well water test. They have the proper resources and technologies to obtain an accurate reading. You can, however, purchase your own well water testing kit, but these are not always as accurate, and accuracy counts when it comes to developing a viable soft water plan for a well water-using property.

Hard Water Solutions for Wells

Whether your property operates on a well or municipal water, the most effective and proven solution to hard water is water softening. Installing a quality water softener that is the correct size and capacity for your soft water needs is the smart approach to hard water removal. Not only does soft water feel better, taste better, and perform better, but it saves you a lot of money. In addition to saving on water and energy bills, you will also save on shampoo, soap, detergent, clothing, and premature appliance repairs and replacements!

Are you ready to save loads of money by implementing an innovative soft water plan? Contact Weilhammer Plumbing Company at 317-784-1870 for professional water softener service and repair in Indianapolis, Indiana. We serve residential and commercial clients with the most effective and affordable plumbing and water softening services around!

7 Things You Can Do to Unclog Your Shower Drain

Posted on May 20, 2022 by weilhammerplumbing

Nothing quite drains the pleasure out of your morning or post-work shower than standing ankle deep in soapy water. If your shower drain is clogged, it is important to troubleshoot the issue as soon as possible, not just for the sake of your bathing enjoyment, but also for preventative maintenance purposes. Fortunately, there are many things you can do on your own that can solve the problem right away.

Continue reading to learn the top 7 things you can do to unclog your shower drain.

Drain Clearing Indianapolis Indiana 317-784-1870

How to Fix a Clogged Shower Drain

So, what causes a shower drain to clog up? Well, the answer is quite obvious. Mostly, hair, dirt, and soap residues are to blame, but shower drains can also fall victim to obstructions caused by thick shaving cream, lost jewelry, razor caps, toys, and all sorts of other common bath time accoutrements. Many people like to brush their teeth and floss in the shower, so floss is a common obstruction found in shower drains.

Not to worry, as there are plenty of ways to unclog that troublesome shower drain of yours! Here are the top seven things you can do to unclog your shower drain:

Manual Dislodging

The first thing you want to do to fix a clogged shower drain is to manually dislodge anything that’s obstructing the drain. Any visible obstructions like hair or soap scum should be cleared away of your shower drain before testing other methods of repair. Yes, this will be a slimy and unpleasant task, so put on some rubber gloves and possibly even a face mask.

Plunger

When your manual attempt doesn’t work, grab your plunger. Use the plunger over the shower drain in the same way you would use it in the toilet if the toilet were clogged. Place the plunger directly on top of the shower drain and pump it several times with force. Then run the shower to see if the water flows through the drain smoothly. If that doesn’t work, you may need to get deeper inside the drain. The next few methods will help you do that.

Boiling Water

If the first two methods don’t work, boil some water on top of your stove, and then pour it down your shower drain. Sometimes this can clear out shaving cream, dirt accumulation, and soap scum buildup. Once these residues are cleared, your shower drain should flow smoothly. Just be careful when you’re handling the boil water because it will burn you.

White Vinegar and Baking Soda

If boiling water isn’t strong enough, make a concoction of distilled white vinegar and baking soda. Then pour the solution down your drain. This is basically a homemade drain cleaner, but without all of the harsh chemicals and damaging ingredients. You may need to repeat this a few times to get the drain entirely cleared. Oftentimes, this vinegar and baking soda solution is well paired with an auger, also known as a drain snake.

Drain Snake

A drain snake is a long, thin, plastic, flexible, handheld auger that is used to dislodge any obstructions within a drain. Drain snakes can be purchased for as little as one dollar at any local department or grocery store. You can literally find them anywhere that sells regular home goods or household products. To use an auger, simply push it deep into the drain as far as you can, then turn it a few times before pulling it out. You will be shocked to see what comes out with it!

Wire Hook

You can also use a metal hook in the same way you would use a drain snake to dislodge any obstructions within the shower drain. Just be careful using this method because you can accidentally poke or stab yourself. Most people will take a wire hanger and unwind it to form a hook and handle. This works really well when you don’t have an auger on hand.

Licensed Plumber

Your last resort is to contact a licensed Indianapolis plumber for drain cleaning and clearing service. They have the proper tools and resources to promptly resolve drain issues. Because drain clearing is typically an easy and speedy service, you can expect it to be affordable as well.

Do you need some professional drain clearing and cleaning service for your shower, sink, bathtub, or outdoor drains? Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing service and repair in Indianapolis, Indiana and its surrounding counties. We serve residential and commercial clients.

Best Salt Options for Residential Water Softeners

Posted on May 17, 2022 by weilhammerplumbing

Water softeners are excellent, money-saving appliances that significantly contribute to your quality of life. Not only do water softening systems remove solid and dissolved minerals from water, making them an effective solution for hard water removal, but they also reduce monthly utility costs by saving homeowners energy and water. Even better, water softeners protect other important plumbing appliances, such as water heaters, washing machines, dishwashers, piping, and more.

By having a water softener, you have already made a wise and impactful decision for your home. Nonetheless, using the right softening salt is another important element of soft water maintenance at home. But which softening salt is best for your water softener? What are the differences between potassium and sodium chloride salt pellets?

Continue below to learn some of the best salt options for residential water softeners, plus where you can get more advice and service for your water softening needs in Indianapolis.

Water Softeners Indianapolis Indiana 317-784-1870

Top 2 Water Softener Salt Options

When it comes to choosing a water softening salt, it is important to select a quality product. Lower-quality water softener salts contain high traces of contaminants and water-insoluble matter. Such contaminators can leave behind residues in the water softener tank, which can lead to breakdowns and costly repairs. Although brine tank cleaning can abate the likelihood or frequency of water softener malfunctions, using a good quality water softening salt can eliminate the risk of long-term damage.

Sodium Chloride and Potassium Chloride

The top two options for water softener salt are sodium chloride and potassium chloride. Each water softener salt product is acceptable in most types of water softeners, but one might work better than the other for your water softener unit or softening needs.

Sodium chloride is your traditional water softening salt. Common types include evaporated salt pellets, solar salt pellets, rock salt, and block salt, all of which comes in three forms: pellet, crystal, or block. Evaporated salt is the highest purity water softener salt at 99.9% pure salt, and it comes highly recommended. Solar salt is a close second being 99.6% pure salt.

Rock salt contains high calcium sulfate levels and does not dissolve well. For these reasons, rock salt is not usually recommended because it cause a lot of water softener maintenance issues. Sodium chloride water softener salt will be the more economical buy, as it tends to be less expensive to potassium chloride water softening salt. It tends to be more available as well.

Potassium chloride is another type of water softening salt that works well to regenerate the softening resin. Potassium chloride is great for anyone looking to reduce their sodium intake because it is 99.9% sodium-free. Although a bit pricier and more challenging to come by, potassium chloride water softening salt is an excellent alternative to the traditional water softener salts on the market.

Switching Water Softener Salts

If you have been using sodium chloride and wish to make the switch to potassium chloride water softener salts, you may need to increase the salt dosage by up to 10% to accommodate proper resin bead regeneration.

If you have been using potassium chloride and now wish to switch back to sodium chloride, you can do so without making any major modifications or adjustments. If you increased the salt dosage on the valve when you originally switched to potassium chloride, you may need to adjust this again to accommodate for sodium chloride water softening.

Would you like to learn how to improve your soft water quality at home or in the office? Contact Weilhammer Plumbing Company at 317-784-1870 for licensed and insured water softener services in Indianapolis, Indiana. We serve residential and commercial clients, offering water softener sales, service, and repair! Ask us about our saltless water softeners!

How to Clean Around the House Using Lemons

Posted on May 13, 2022 by weilhammerplumbing

Whether you go organic, large, small, or pre-squeezed, there are several ways to use lemons and lemon juice for cleaning around the house. Whether at home or on the road, you can trade the normal methods for everyday cleaning with a fresh-smelling, antioxidant, and Eco-friendly alternative: lemons! Manage upholstery stains, smelly laundry, clogged drains, limescale, mold, bacterial growth, and much more!

Continue reading for all the creative and non-toxic ways to clean around the house with store-bought lemons and a few other household ingredients.

Plumbing Services Indianapolis Indiana 317-784-1870

How to Clean With Lemons Around the House

Clothing Stain Removal

Aprons, clothing, uniforms, sheets, blankets, upholstery, curtains, tablecloths, place mats, serving napkins, and more can fall victim to staining. Blood, grease, dirt, rust, and grass stand no chance when using fresh lemon juice. It can help remove these types of stains and more! Simply dab equal parts of salt and lemon onto the stain and allow it to sit for an hour, then wash normally using detergent.

Disinfecting

Lemons can be used as disinfectants for several types of surfaces. For example, kitchen cutting boards are perfect hosts for lingering bacteria and germs. Lemon juice can eliminate these hazards, as well as, stains, with a simple and quick ten minute soak. Pour or squeeze the juice of a lemon onto a wood cutting board and allow it to sit for ten minutes before rinsing. And simple repeat if necessary.

You may also rub the exposed part of the lemon all over the surface for added effects. It is a fantastic way to kill germs naturally. Use on other surfaces as well, like tables and sinks. They are naturally scented too, making them free of chemicals that replicate the fresh smell of lemons people commonly associated with cleanliness. Never use lemon juice on granite or marble surfaces.

Hardwood Floors and Furniture

Polish hardwood furniture and floors the natural way by combining a cup of olive oil with a half cup lemon juice! Dab first on a cloth and use sparingly in circular motions. Buff the floors out with a clean dry microfiber cloth afterwards.

Kitchen Cleaning

You can clean dishware with just lemons and baking soda. Cut a lemon in half and dip the exposed portion into a pile of baking soda. Then just use the lemon as if it were your dishcloth! Citric acid is an effective de-greaser and will cut-through and loosen grime on dishware. You can also place a cup of lemon juice in the bottom of an empty dishwasher and run a cycle to deodorize it naturally.

The same goes for microwaves. Deodorize and eliminate bacteria inside a microwave by placing lemon slices in a microwave-safe bowl of water and heat for one minute. This kills the bacteria and humidifies the inside, allowing grease and stuck-on food to loosen. Just wipe the inside of the microwave out with a clean rag afterwards!

Drain Cleaning

To clean drains, pour half of a cup of baking soda down the drain and then pour a cup of hot lemon juice down afterwards. Allow this mixture to work itself in for a few minutes, then rinse with hot water. To clean and deodorize garbage disposals, drop a few citrus peels down the drain and run the disposal with cold water from the faucet. Lemon wedges can be placed inside a refrigerator to eliminate bad odors as well.

Mold Remover

No matter what color of mold you have or where it may be, you can use lemon juice and good old fashioned elbow grease to remove it. Tiles, plumbing fixtures, and other surfaces can be scrubbed clean of mold with a pasty mixture of lemon juice and salt.

Limescale and Soap Scum Remover

Aside from mold, lemons can also be used to clean soap scum, limescale, hard water deposits, and other similar residues. For this, mix two parts of bicarbonate soda and one part lemon juice, and then apply the paste to the soiled area. Allow to sit, then scrub with cloth or toothbrush. Rinse thoroughly.

Additional Lemon Cleaning Applications:

◾ Glass Cleaner
◾ Mirror Polisher
◾ Shoe Shiner
◾ Metal Polisher
◾ Laundry Bleacher
◾ Air Freshener

Are you plumbing fixtures damaged limescale? Did a water leak cause a mold outbreak in your home? Perhaps you are ready to update some kitchen and mudroom appliances? Contact Weilhammer Plumbing Company at 317-784-1870 for Indianapolis Indiana plumbing services for water heaters, water softeners, water leaks, kitchens, bathrooms, and more. We provide residential and commercial plumbing services all throughout Central Indiana.

Best Suggestions for Hot Water Heater Problems

Posted on May 5, 2022 by weilhammerplumbing

It’s really hard to live without the luxury and convenience of hot water. So, when your hot water heater starts to show signs of malfunctioning, it’s important to start troubleshooting the underlying issue right away. Continue reading to learn the best suggestions for solving a hot water heater problem, plus who to trust in Indianapolis for affordable emergency water heater repair services.

Indianapolis Water Heater Services 317-784-1870

Water Heater Problems and Solutions

Water heaters are not the complex appliances you might assume them to be. In most cases, you are likely capable of diagnosing the problem on your own. Other times, it is necessary to hire a licensed and insured water heater company in Indianapolis to inspect and diagnose your hot water issues. The first step in identifying a water heater problem is determining how the problem is presenting itself. The way in which your water heater problem presents itself will give you clues as to what the underlying issue is within the appliance.

The most common water heater problems include lack of hot water, no hot water, hot water, taking too long to heat up, odorous water, and discolored water. A noisy water heater is another common indicator of a problem.

Lack of Hot Water

If you’ve noticed that your hot water just isn’t as hot as it used to be, start by checking your water heater temperature gauge. It is recommended for safety reasons to keep your water heater temperature under 120°F. Anything above this can pose risks of scalding or burn accidents. If your water heater temperature setting is below hundred and 10°, it could have been nudged over, thus causing the reduced heat of your water.

If your water is hot enough but just doesn’t last as long as it used to, you might have a water heater that is too small for your residence. This often happens when you get new roommates or occupants in the home. If you don’t have new occupants in the home, you could have a water heater leak.

If your water is too hot, again, check the temperature settings. It might’ve been nudged over in the wrong direction, thus causing the temperatures increase.

Zero Hot Water

If your hot water has disappeared completely, it is generally suggestive of a damaged heating element or problem with the water heater’s power source. It could just be a tripped circuit breaker. Other times, the tank simply runs out of hot water due to over-consumption, and simply needs time to refill.

Smelly or Discolored Water

If your hot water smells like rotten eggs, your water heater could have a buildup of bacteria and other contaminants, causing the production of sulfur. If your hot water has more of a seasoned or garlicky smell, your pilot light might’ve burned out.

If your hot water has a rusty color or looks dirty, you could have a buildup of rust and sediment within the water heater tank. In this case, you would want to outsource water heater flushing service. This might involve replacing a corroded anode rod.

Noisy Water Heater

If you’re hearing your water heater makes strange or loud noises, it could be an indication that it requires maintenance. If your water heater is between 8 and 10 years old, it might need to be replaced entirely. If your water heater is fairly new or still middle-aged, you can pinpoint the issue by listening to the type of noise. Clanking metal noises could be due to the metal constituents within the tank contracting and expanding. Dripping noises are indicative of a leak, while sounds of boiling water are generally indicative of overheated interior components.

Would you like a professional to take a look at your water heater? Contact Weilhammer Plumbing Company at 317-784-1870 for affordable hot water repair and water heater services in Indianapolis, Indiana. We serve residential and commercial clients.

Non-Toxic Cleaning Solutions You Can Make Yourself

Posted on April 26, 2022 by weilhammerplumbing

Many store-bought cleaning agents contain high amounts of harmful chemicals and toxic solutions. Not only can these be dangerous to humans, pets, and wildlife, but they can also damage your home’s plumbing systems, appliances, and more. So, let’s keep the Earth Day momentum going by introducing some non-toxic, homemade cleaning solutions you can use all around the house and beyond! Continue below to get started with some easy recipes you can make right at home.

Why Make Your Own Cleaners

Various products on the market today fail to specify their dangerous chemicals on the ingredients label. So, the best way to avoid contact with these types of dangerous products is to simply replace them with safer alternatives. Making your own chemical-free, non-toxic household cleaning products is extremely rewarding. Best of all, it is a lot less expensive and easy to do!

Simple and Safe Homemade Cleaning Solutions

Purchase quality spray bottles. Be sure to choose bottles with ounces measured on the outside of them. This will help you measure and mix solutions quicker and easier. Also, always label each bottle with the type of cleaning agents inside. For example, if the solution is for your kitchen, label it, “kitchen cleaner”, or something similar. Safe ingredients that can be used to create your own homemade cleaning solution range from vinegar and baking soda to borax, Castile soap, and essential oils. Make your own combinations and experiment with what works best for your cleaning goals and even allergies.

Safe and Non-Toxic Ingredients Include, But are Not Limited To:

❧ Distilled White Vinegar
❧ Baking Soda
❧ Borax or Washing Soda
❧ Olive Oil-Based Soap
❧ Coconut Oil-Based Soap
❧ Vegetable Soap
❧ Castile Soap
❧ Fresh Squeezed Lemon Juice
❧ Essential Oil
❧ Clean Water

⚠ Safety Warning ⚠
Although you are making Eco-friendly and safe cleaning products, it is still strongly encouraged to keep them locked up and out-of-reach from children, pets, and wildlife. No one wants to be responsible for a sick animal or child. If these solutions are ever ingested in large quantities, immediately contact emergency services for medical attention.

How to Use Your New Cleaners

When it comes to cleaning your kitchen with Eco-friendly solutions, use a mixture of baking soda, Borax, or washing soda with a little bit of vegetable soap and warm water. This solution can be applied on counters, floors, appliances, and other surfaces.

For ovens and appliances, mix baking soda and washing soda with a little bit of water to make a paste. Generously apply the paste and allow it to sit overnight. Then wash away in the morning for best results.

For countertop cleaning, gently scrub an even mixture of these same ingredients, and then rinse with clean water.

For cutting boards, use a mixture of vinegar and 3% hydrogen peroxide. Bottle each solution separately, spraying first with the vinegar and second with the hydrogen peroxide. Repeat these steps until you achieve a clean surface.

Drains, Sinks, Tubs, and More

Use the same solutions and recipes for bathroom tile, bathtubs, bathroom countertops, toilets, and sinks. For drains, use a combination of baking soda and vinegar. First poor half cup of baking soda down the drain, and then pour 1 cup of vinegar down the drain. Allow the drain to rest for a few minutes and then run hot water through the drain until it is unclogged.

Are you experiencing cloudy or spotty dishes? How about clogged drains or smelly water? Solve your plumbing issues soon, before they can get worse, and costlier! Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing service and repair in Indianapolis, Indiana and its surrounding counties. We serve residential and commercial clients.

Support Earth Day This Week With These Money-Saving Plumbing Tips

Posted on April 22, 2022 by weilhammerplumbing

Today, April 22, 2022, is Earth Day! There are many ways to show your support for this very important and special day, and we hope that you find joy in whatever you choose! As for plumbing, you can save money and back the Earth Day cause by adopting some new plumbing-related systems and practices!

Continue below to learn more about the meaning of Earth Day, plus how you can make the switch to Eco-friendly plumbing in support of the environment and your bank account!

Plumbing Service Indianapolis Indiana 317-784-1870

What Does Earth Day Mean to You?

Earth Day was officially established in 1970, following a tremendously damaging oil spill in Santa Barbara, California that got the attention of Senator Gaylord Nelson. He came up with the idea after seeing how destructive the oil spill was to the local Eco-systems and dependent economies. He wanted the nation to realize just how important it is to preserve and protect our natural resources. Back then, the nation did not pay much attention to the damaging effects of industrial and societal pollution. Rachel Carson’s 1962 publication of “Silent Spring” was one of the first considerations of such environmental threats.

So, with gusto, Senator Nelson decided to gather up a group of trusted colleagues to brainstorm ways to increase such awareness. The result was the proclamation of April 22nd to be a “national teach-in on the environment.” Of course, we know this as Earth Day now. In fact, Earth Day was one of the catalysts of the environmental movement that lead to the formation of the Environmental Protection Agency (EPA) and even the passing of important acts, like the Clean Air Act, Clean Water Act, and the Endangered Species Act.

✨ Visit earthday.org to learn more!

Eco-Friendly Plumbing to Support Earth Day and Environmental Protection:

Tankless Water Heaters

By making the switch from a traditional, tank-style water heater to a tankless water heater, you can preserve natural resources and save money for years to come. According to the Department of Energy, tankless water heaters can reduce energy consumption by 25% to 50% compared to tank-style units.

Tankless water heaters are highly energy-efficient, and a trusted alternative to on-demand hot water. Water is only heated when prompted, like when you run a bath or shower. That way, you are not wasting precious energy to keep water hot in the tank. These water heaters come in electric or gas.

Water Heater Temperature Setting

Having a water heater temperature setting that is too high poses a lot of safety risks, but also wastes energy. Set your water heater at a safe and comfortable 120° Fahrenheit to conserve energy and prevent burns and scalding accidents.

Dual-Flush Toilets

Water-saving toilets save more than just water. They also save you money on utility bills, potentially hundreds of dollars a year. Consider installing a dual-flush toilet to increase the level of water preservation in your home or office. These toilets are specially-designed to provide an option for a light flush or a deep flush. Think light for liquids and deep for solids. If your toilets were installed back in the 90’s, you are likely using up to 3 gallons of water per flush. That’s too much water!

Faucet Aerators

By adding aerators to your sink faucets, you can significantly reduce water wastage in your home or office. Also called low volume water restrictors, these tiny plumbing devices do what they claim: they mix the flow of water with air, thus aerating it, which reduces the volume of water flow. This can save up to 2.2 gallons of water! Plus, they are easy to install, as they simple screw onto the end of your faucets, and they come with an inexpensive price tag.

Additionally, you can swap out your old shower heads for a low-flow showerhead, which basically works in the same way as faucet aerators. A low-flow showerhead can potentially save the average family thousands of gallons of water each year. When shopping around, look for the WaterSense label.

Drip Repair

If you have a slow drip coming from a faucet, bathtub spout, or showerhead, it is money-wise to have it repaired right away. Whether a slow drip or a continuous one, this plumbing defect can waste a lot of water. In turn, your monthly utility bills take a hit.

Pipe Insulation

If your pipes are not properly insulated, whether lacking insulation or fitted with the wrong type of insulation, it can cause massive heat loss in your home’s water. By improving or repairing plumbing pipe insulation, you can better conserve energy and water.

Are you looking for a trusted plumber that can help you incorporate some Eco-friendly elements into your home or office? Contact Weilhammer Plumbing Company at 317-784-1870 when you need professional and affordable plumbing services for water heaters, toilets, plumbing pipes, and more, in Indianapolis, Indiana. We serve residential and commercial clients.

The Difference Between Salt and Saltless Water Softener Systems

Posted on April 14, 2022 by weilhammerplumbing

When it comes to buying a new water softener, consumers quickly learn that there is an overwhelming large number of options in terms of make, model, capacity, and efficiency. It is important to do your research and learn as much as you can about how water softeners work and the various versions currently available on the market in order to make the right decision for your home or office. Once you have a basic understanding of the water softener market, you can decide which version best meets your needs. The most basic decision is deciding between a salt-based and saltless water softener.

Continue reading to learn the difference between salt-using and salt-less water softener systems, plus who to trust for sales, service, and repair in Indianapolis and its surrounding areas.

Saltfree Water Softeners Indianapolis Indiana 317-784-1870

Water Softening: Salt Versus Saltfree

Traditional Water Softeners

Traditional salt-style water softeners use a process called ion exchange to eliminate hard mineral ions in water. They remove hard mineral ions from water by using negatively charged polymer resin beads that attract the positively charged ions, and then exchanges them with sodium potassium, which comes from the salt pellets used in the unit. Once the resin beads become too saturated, the water softener flushes them out through a drainpipe. This cleaning cycle is triggered automatically by an electronic meter valve on top of the unit.

Saltless Water Softeners

In contrast to salt-based water softeners, saltfree water softeners do not remove hard mineral ions. Instead, they change their chemical composition so that they do not adhere to anything. This process is known as Template Assisted Crystallization (TAC), which processes water through a catalytic media. The hard mineral ions are changed to hardened crystals that is not capable of sticking to any surface. Because of this fact, saltless water softening does not technically soften water, but rather, conditions it. For this reason, non-salt water softeners are more accurately described as water conditioners.

Saltfree Water Softeners in Indianapolis

To determine which water softening and conditioning system is best for your home or office, talk to a trusted Indianapolis IN water softener plumber who can offer professional advice, information, and installation. Choosing a water softener is just the beginning. Ensuring proper installation and routine maintenance sets the tone for problem-free water softening.

Are you looking for affordable water softeners and water softener service near you? Contact Weilhammer Plumbing Company at 317-784-1870 for professional sales, installation, service, and repair for saltless water softeners, today. We provide residential and commercial plumbing services for all make and model water softeners.

How to Stop an Overflowing Toilet

Posted on April 6, 2022 by weilhammerplumbing

An overflowing toilet isn’t just a frustrating and panicky problem to experience, but it’s also typically a nasty one. Fortunately, there are easy solutions for fixing an overflowing toilet right in the moment and preventing it from happening again in the future. Continue reading to learn how to stop an overflowing toilet and who to trust in central Indiana for quality plumbing service and repair.

Toilet Plumbing Services Indianapolis Indiana 317-784-1870

What To Do When Your Toilet is Overflowing

The great thing about an overflowing toilet—and we know what you’re thinking; “What could possibly be great about a toilet that is overflowing its unsanitary contents all of your bathroom floor?” Nonetheless, there is a positive element, and that is the fact that you can usually fix an overflowing toilet on your own.

Here are some supplies you might want to have on hand for emergency purposes in the case of the toilet is ever overflowing: rubber gloves, disposable towels, plunger, auger, and disinfecting solution.

Here’s What To Do:

SHUT OFF THE WATER SUPPLY

The first thing you want to do when your toilet starts to overflow is shut off the water supply. There is a valve located at the base your toilet that supplies the water to the toilet. Turn this valve counterclockwise, following the age old phrase lefty-loosey & righty-tighty, to stop the water from entering your toilet. To further protect your home from water damages and flooding, turn off the main water supply to the home as well while you work on the problem.

It is important to know exactly where your main water shut off valve is in your home for these types of flood-level emergencies. Main water shut off valves are commonly located in mud rooms or utility rooms, or in the garage or basement. Once you turn the water supply off, either to your toilet or to your home, the toilet should not continue to overflow water. However, you still need to deal with the water that has already overflowed.

CLEAN UP

It is critical to clean up a flooding mishap or large water spill, like an overflowed toilet, as possible to prevent water damages. If you allow water to sit on the floor, even for fifteen or twenty minutes, it can seep through the floorboards and into the home’s insulation and so forth. This can cause all sorts of wood rot, mold growth, and structural deterioration. It can also lead to foundation problems and repairs, which are both costly and invasive.

Allowing dirty toilet water to sit even for five or ten minutes on your bathroom floor can cause warping, discoloration, mold development, and all sorts of other design and aesthetic defects in laminate, tile, vinyl, and wood floors. Just be sure to clean up the overflowing toilet mess. As soon as it happens, to prevent further problems and frustrations down the road.

SOLVE THE TOILET PROBLEM

Your next step in the process of fixing an overflowing toilet is to actually fix the toilet. You need to determine what caused your toilet overflow and remedy the problem so that your toilet does not continue to have overflow incidents in the future. Clogs are one of the most common causes of an overflowing toilet, so use your plunger or auger (drain snake) to release anything causing an obstruction. You can also take a look in the toilet tank to see if anything is disconnected or clogged. If you can’t figure out what the problem is with your toilet, contact a local Indianapolis plumber for toilet inspection and repair.

Are you having some serious toilet problems that require some professional attention? Contact Weilhammer Plumbing Company at 317-784-1870 for plumbing repair and service for toilets and bathrooms in Indianapolis, Indiana. We serve residential and commercial clients.