Why Your Bathroom Sink Has Low Water Pressure

Posted on November 17, 2021 by weilhammerplumbing

Depending on the number of occupants and bathrooms in your home, your bathroom sink likely sees a lot of action. Whether you live alone or have a full house, single faucet bathroom sinks can begin to experience a decrease in water pressure over time. Although there are many things that can cause low water pressure in your bathroom sink faucet, the number one culprit is typically a clogged aerator.

Continue reading to learn how to inspect and clean a faucet aerator all on your own, but also, what to do if the underlying issue seems to be pointing toward something else.

Bathroom Sink Repair Indianapolis IN 317-784-1870 — Sink Repair Indianapolis IN 317-784-1870

Bathroom Sink Faucet Aerators

Most single standing faucets are equipped with a piece known as an aerator. However, bathroom sinks are almost always fitted with them. An aerator is a screw-on hardware fitting that connects to the underside of a faucet spout. They are designed to break up the solid stream of water from a faucet by adding air to the stream. So, rather than having water spewing out of the spout like a garden hose, water is gently and evenly balanced during dispersal. If you took the aerator off, the water would gush out of the faucet spout.

Another benefit of faucet aerators is water preservation. It is suggested that aerators can reduce water consumption by up to 30% in the average household.

Aerator Clogs

Aerators are well-known for accumulating solid debris and particles over time. As a result, faucets tend to lose water pressure value. Grit, mineral buildup, so residues, hair, and more can obstruct the air and water flow in an aerator, which first presents as reduced water pressure. Typically, a quick cleaning is all it takes to get your water pressure value back to where it was before the aerator clog developed.

In order to determine if your bathroom sink aerator is clogged, you will have to examine it, and possibly clean it if necessary. In some cases, you will need to replace the aerator, but this is usually only necessary if the metal screening is damaged or warped.

How to Clean Your Faucet Aerator

If you take your finger and touch the area of your bathroom sink faucet where the water comes out, you should be touching the aerator. Sink aerators are screw-on plumbing devices, so you should be able to remove it by simply twisting it off. Although the same lefty-loosey righty-tighty rules apply when it comes to threading, keep in mind that you are looking from above rather than below the spout. So, you will twist right to remove the aerator from the faucet spout.

If the aerator is not screwing off by hand, you can use a pair of pliers, however, be warned that this approach can be permanently damaging to your plumbing fixtures. If you cannot remove the aerator on your own, it is recommended to contact local Indianapolis plumbing service for professional assistance.

Once you have removed the faucet aerator, it is important to keep track of all of the separate parts. They need to be kept in order when you reattach them. As for cleaning, you have some options. You can soak it in distilled white vinegar and then gently scrub it with baking soda. Or, if the clog is more substantial, you can soak the aerator parts overnight in a limescale-dissolving cleaning solution.

Are you experiencing plumbing problems like low water pressure or clogs? Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing service and repair in Indianapolis, Indiana and its surrounding counties. We serve residential and commercial clients.

Indianapolis Indiana Master Plumbers 317-784-1870

How to Tighten Up a Toilet Lever That is Loose

Posted on June 9, 2021 by weilhammerplumbing

Toilet levers, or handles, are used several times a day; so, it is no surprise that they begin to loosen overtime. Although not a serious repair, it is important to remedy a loose toilet lever because it can affect toilet performance and efficiency. Not only is a toilet with poor flushing performance unpleasant and unsanitary, but its inefficiency can also increase monthly water bills. Fortunately, this is generally an easy fix, and one that you can accomplish all on your own with a few simple adjustments.

Continue reading to review a step-by-step guide on tightening a loose toilet tank lever.

Indianapolis Bathroom Plumbing Service 317-784-1870

How to Fix a Loose Toilet Handle:

What You Will Need

To tighten up a loose toilet tank handle, you won’t require very many tools or supplies. That is because it is not a very invasive repair. Most likely, you will already have the tools necessary to get the job done. This saves you time by avoiding a trip to the local home improvement store. All you need is your own two hands and an adjustable wrench.

How to Do It:

✅ Start by locating the water shut-off valve for the toilet. The supply pipe and handle should be behind the tank. Turn off the water supply to the toilet by rotating the shut-off valve handle clockwise.

✅ Once the shutoff valve is closed, remove the toilet tank lid. Grab both sides and lift upwards. It should not be sealed or connected to the toilet. Place it down slowly on a flat, stable surface so you do not crack or break it.

✅ You will now need to empty the tank of water. Do this by simply flushing the toilet with the handle. It is easier to adjust a loose toilet lever without water in the tank.

✅ Now look for the metal nut that secures the toilet lever to the inside of the tank. This is the nut that has come loose. Standard screws and other threaded hardware are forward threaded, but toilet lever nuts and screws are reverse-threaded with a plastic washer. This helps to prevent loosening overtime.

✅ Use your adjustable wrench to tighten the nut. Do this by grasping the nut with your wrench and turning it clockwise. Continue turning the nut until you begin to feel resistance. Once you feel this resistance, make only a couple more turns until it is difficult to turn any more. Be careful to not overdo it and accidentally crack the tank.

✅ Next, test the lever’s tightness and performance by pressing it as if you were flushing the toilet. If it does not compress well, it is too tight, and you will need to loosen it by one or two rotations. Loosen counterclockwise with your wrench.

✅ Finish by turning your water supply to the toilet back on!

Still having problems with your toilet or bathroom plumbing? Contact Weilhammer Plumbing Company at 317-784-1870 for Indianapolis Indiana plumbing services at an affordable price. We provide residential and commercial plumbing service and repair.

You Might Also Read:

How to Fix a Running Toilet Handle
3 Toilet Problems SOLVED!
The Two-Step Method to Fixing a Clogged Toilet

Quick Guide to Choosing a New Faucet

Posted on April 8, 2021 by weilhammerplumbing

If you’ve decided that you want to give your bathroom or kitchen an instant upgrade without any invasive construction, swapping out the plumbing fixtures for new ones is a great strategy that better fits the budget. As one of the main focal point plumbing fixtures, the faucet is a good place to start. Choosing the faucet will set the rest of the foundation for any additional upgrades you might want to dapple in later. But when you begin the selection process for a new faucet, you will instantly discover that there are countless types to choose from.

To help with the overwhelming feeling of selecting the right faucet for your plumbing and décor needs, use this trusty guide as a reference. It will help you break down exactly what you are looking for and what you need, all in a streamlined, organized fashion!

Indianapolis IN Plumbing Services 317-784-1870

Top Faucet Shopping Criteria to Focus On

When choosing a new indoor faucet, you want to focus on function first, but also style and size (fit). Nowadays, you can also consider more technological options. Here are some key points that you can review to help you decide exactly what you are looking for in a new faucet:

Faucet Style and Finish

You can find all sorts of styles, shapes, and finishes on the market for faucets, from sleek silhouettes and period pieces to luxurious finishes, matching accessories, sturdy and basic designs, and everything in between. Decide what speaks most to your ultimate bathroom or kitchen renovation, and narrow your search down to that particular design.

Faucet Function and Fit

The most important element to choosing a new faucet is its compatibility with your existing plumbing setup. For instance, if you have a vessel sink, you would do better choosing a tall, single-handled model rather than a short, open flow model. Be sure you narrow your search down to faucets that fit your setup and will provide the type of function you are looking for, such as low-flows, waterfall effects, splash-guard, and more.

Faucet Technology

In today’s market, innovative technology is everywhere, and constantly evolving. With modern-day faucets, the technological advancements are very smart. You may want to consider hands-free or touchless faucets, or perhaps LED light-up faucets for nighttime use. If you have kids who like to leave the water running, you can opt for a faucet with motion-detection, automatic shut-off technology.

Do you need some help with your plumbing renovations? Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing services in Indianapolis, Indiana. We serve both residential and commercial clients all throughout the central parts of the state.

You Might Also Read:

How to Install a Sink Faucet
3 Eco-Friendly Plumbing Fixtures to Try in Your Home
4 Trendy Bathroom Plumbing Upgrades to Consider This Year

Top 3 Causes of Low Water Pressure at Home

Posted on September 23, 2020 by weilhammerplumbing

When your water pressure is not up to your standard, everything from dish-washing to taking a shower is affected in a negative way. Fortunately, there are several effective solutions for resolving water pressure issues at home. But in order to conquer your low water pressure woes, you must first determine the root of the problem.

Continue reading to learn the top 3 causes for low water pressure, and use this information to gauge which type of plumbing service or repair you might need.

Indianapolis Water Pressure Repair 317-784-1870

Get Rid of Low Water Pressure for Good

As mentioned, low water pressure problems are not something you have to learn to live with. They can be resolved, so long as you know why they exist in the first place. Although there are thousands of reasons why water pressure plummets, there are three causes in particular that seem to be the most common among Indiana home and business owners. The top three causes for low or reduced water pressure are pipe leaks, pipe corrosion, and plumbing obstructions.

Leaky Plumbing Pipes

Low water pressure that slowly becomes worse overtime is a common telltale sign of plumbing pipe leaks. It makes sense; right? If there are cracks in a pipe or fitting, the water will naturally displace, thus reducing the pressure built up on demand. Typically, in these cases, low water pressure issues will be noticeable before water bills go up. Look at your toilet first if you suspect you have a pipe leak. Toilets are notorious for having short lifespans and leaks. If it’s not your toilet, it could be that your plumbing pipe material is more prone to cracking and leaking.

Corroded Plumbing Pipes

Old or corroded plumbing pipes are simply not as efficient in terms of performance. If your plumbing pipes were installed prior to the 60’s, they are likely steel, which inevitably rusts overtime. As a result, pipes become corroded, and sometimes even clogged by the corrosion. Although copper plumbing is rust-resistant, their fittings and joints might not be, which means they too can suffer oxidation and corrosion.

Obstructed Plumbing Pipes

Clogged plumbing pipes will certainly put some drag on the level of your water pressure. Obstructions can be caused by all sorts of things, such as corrosion mentioned above. Other pipe obstructing culprits include organics, minerals, food waste, toilet paper, sand, dirt, and more. Keep in mind, clogged shower heads and faucets can also cause lower water pressure. You may need to replace your faucet’s aerators, and clean out your shower head, for improved water pressure.

If you are experiencing water pressure dilemmas in your home or business, call a licensed Indianapolis plumber for professional plumbing services and diagnostics. Adequate water pressure is more than a personal luxury, it is a true asset for any home, and can even increase a property’s overall value.

Professional Indianapolis Indiana Plumbing Repair Services

Call Weilhammer Plumbing Co. Inc. at 317-784-1870 when you need a licensed Indianapolis plumber you can trust for quality plumbing services and repair at an affordable price. We offer a wide range of standard and master plumber services for both residential and commercial properties. We also offer free estimates, free plumbing advice, and even free haul-away for old plumbing appliances like water heaters, water softeners, sump pumps, and more. Request a free estimate, today.

Why You Need to Stop Using OTC Drainage Cleaner

Posted on October 16, 2019 by weilhammerplumbing

When you have a clogged drain at home, do you instantly reach for a bottle of liquid drain cleaner? If so, it is time to put that habit to rest. Using over-the-counter drainage detergents is a risky and consequential approach to DIY drain clearing. Not only can it decrease the life of your plumbing pipes, it can affect your monthly water and energy expenses as well.

Continue reading to learn why OTC drain cleansers are terrible for your home’s plumbing pipes, as well as a safer alternative to do-it-yourself drain cleaning.

Indianapolis Plumbing Service and Repair 317-784-1870

A Warning About Liquid Drain Cleaners

Consumers use liquid drain cleaners because they work fast; but the reality is that they only solve the issue temporarily. Long-term use of liquid drain cleaner can lead to more serious problems with your home’s plumbing, which in turn costs you a lot of money in repairs.

You see, popular OTC drain cleaners, like Drano®, are formulated with harsh ingredients, like salt, bleach, lye, aluminum, and sodium nitrate, all of which are highly damaging to galvanized piping and even copper plumbing. It can lead to toilet bowl cracks, melt PVC piping, and corrode the adhesive that connects metal plumbing pipes together.

What’s even more troubling is the fact that liquid drain detergents are incredibly caustic, and can cause severe injury to your skin, eyes, nose, throat, mouth, and lungs. This is especially hazardous to young children and pets. It is also possible to liquid drain cleaners to pollute and contaminate the local water supplies, and thus, cause harm to the surrounding environment.

Make Your Own Drain Cleaner

All you need to clear a clogged drain is a simple drain auger, also known as a drain snake, and a few safe, non-toxic household ingredients, like baking soda and distilled white vinegar. Simply poor a ½ cup of baking soda down the drain, followed by 1 cup of distilled white vinegar. Allow the drain to fizz for a few minutes, then run hot water through the drain until it is unclogged. Toss in a few push and pulls of a drain auger (or plunger), and you have yourself a fail-safe approach to drain cleaning, without all the risk!

Got a Clogged Drain That You Can’t Seem to Fix?

Contact Weilhammer Plumbing Company at 317-784-1870 when you need trusted residential plumbing services in Indianapolis, Indiana and its surrounding counties. Our state-licensed master plumbers have been in the plumbing business for over 100 years because we have earned the trust of thousands of Hoosiers all across the city as a result of our professional service and outstanding results. Request a free estimate or advice, today.

How to Retrieve Items that Fall Down the Shower Drain

Posted on August 5, 2016 by weilhammerplumbing

Bathroom Plumbing Repair 317-784-1870

Last week, we talked about how to get lost items out of a sink drain. But if you lose something down the shower drain, the process of retrieving it is a bit different. Unfortunately, it is a bit more difficult to retrieve lost items down the shower drain, but this doesn’t mean it is not possible. So if you are currently scratching your head and wondering how you’re going to get your earring out of the shower drain, you came to the right place! Continue reading for a brief guide to retrieving lost items that fall down a shower drain.

What You’ll Need:

• Screwdriver
• Long Apparatus
• Wet-Dry Vacuum
• Rubber Gloves
• Flashlight

Magnet on a String

If the object you lost down the drain is made of metal, you may have some luck using a strong magnet tied to the end of a string. Although this sounds rudimentary, it is often very effective and efficient. You can purchase a magnet that will work at any fabric or craft store, craft aisle, or hardware store. They are cheap and can be easily tied to a string. But be sure to use a sturdy string, like yarn or wool. Thread is sometimes not strong enough, and breaks off too easily. If you do not have luck with this age-old magnet trick, it is recommended to call a plumber for professional assistance, or simply use the DIY guide below!

Getting Started…

Shut off the water. For obvious reasons, if you keep the water running, you risk pushing your lost object further down the drain. The quicker you turn the water off, the better your chances will be of retrieving your item of value.

Remove the drain cover. The drain cover, also called a stopper, will most likely be screwed in, so you will need your screwdriver for this step. Be sure to save the small screws in a safe place so you can replace the drain cover later.

Once the drain is expose, use your flashlight to peer inside. If you can see your lost object close up, you can try to pull it out with your hands. Drains can be dirty so wear rubber gloves for safety.

If you do not see it, use a long apparatus to feel around for your lost object. You can use an unraveled wire coat hanger, long grabbing stick, chopstick, or any other apparatus that feels comfortable and small enough to fit inside the shower drain.

If none of the above works, it is time to use your wet-dry vacuum. On the wet setting, vacuum up the contents inside your shower drain. Listen for any clinking noises, and after a few minutes check the vacuum receptacle for your lost object. You may be surprised what else you find!

When finished, replace the drain cover using your screwdriver.

Weilhammer Plumbing Co. Inc.

Weilhammer Plumbing Company Indianapolis Indiana

Weilhammer Plumbing Company 317-784-1870

Call Weilhammer Plumbing Co. Inc. at 317-784-1870 for shower drain repair in Indianapolis, Indiana. Owner and master plumber, Mark Weilhammer, is dedicated to providing economical and effective plumbing services for all home and property owners in Central Indiana. Whether you have light plumbing repair needs, or heavy-duty complex master plumber needs, we are the professionals to call for prompt services and quality results. Call 317-784-1870 to ask about our current plumbing specials this month, or to request a free estimate for Indianapolis plumbing repair, today.

Are Your Water Bills Too High?

Posted on March 1, 2016 by weilhammerplumbing

Indianapolis Plumbers 317-784-1870

As a homeowner, you should know how much your utilities cost you each month. This way, you can monitor your consumption and make changes as needed. When you begin to notice changes in monthly utility costs, it is important to investigate. Of course, if your bills are too low you probably won’t mind, but when they start to get too high, it is reason for concern.

One utility that is important to monitor is water consumption. This is because your water bills can be the first place you notice a potential plumbing problem in your home. When water bills sky rocket for no apparent reason, it could be a sign of many issues, but the most common is a water leak.

Locating and Repairing Water Leaks

Many plumbing fixtures and appliances can leak water. This includes pipes, toilets, sinks, water heaters, water softeners, slabs, and more. The first sign of a water leak is often times a high water bill. As soon as you receive a high water bill, it is important to call a master plumber to inspect your property. The sooner you locate and repair a plumbing leak, the less tedious and costly it will be for you. You must catch a water leak right away to reduce the overall damages it can cause. A leak that goes unnoticed can cost a homeowner thousands of dollars over a course of several years, so even the smallest change in monthly water bills may be cause for concern.

Here is how to check for a plumbing leak:

Turn off all water (including washing machines and dishwashers) and then locate your water meter.

On the water meter, look for a triangle or circle that is either red or yellow. This is the leak indicator. If it is spinning, there is a leak in your plumbing system and you must contact a licensed plumber immediately.

If it is not spinning, then there is no leak. If your bills are high, you still need to contact a plumber to investigate the problem.

For spinning leak indicators, you must immediately shut off the main water valve to the home or risk flooding. Close it slowly so you can better control built-up water pressure. Check a faucet to make sure the water is off.

Once closed, there should be no more movement happening on the water meter. If it is still moving, then your main water shut off valve is broken or not shut all the way.

Weilhammer Plumbing Co. Inc.

Weilhammer Plumbing Company 317-784-1870

Call Weilhammer Plumbing Co. Inc. at 317-784-1870 for water leak inspection services and plumbing repairs in Indianapolis, Indiana. Master plumber Mark Weilhammer has more than 60 years of experience in the plumbing repair industry. We offer all plumbing repairs for both residential and commercial properties. Call 317-784-1870 for professional plumbing services in Indianapolis you can trust and afford!

How to Avoid Pet Hair in Your Plumbing Pipes

Posted on January 6, 2016 by weilhammerplumbing

Indianapolis Plumbing Repair 317-784-1870

We love our pets! Dogs and cats can be just like real members of the family for many people in many different cultures. But as we pet owners know so well, one of the most common drawbacks to owning a pet is managing the spread of pet hair; all around our homes, in our cars, and even on our clothes! Although this issue is wildly minuscule compared to the infinite benefits of owning a dog or cat, it will still have us purchasing extra lint brushes, washing one or two more loads of laundry, or running the vacuum on a twice-a-day basis.

Clothing and chores aside, one real problem that people may not even know they have is pet hair in their plumbing! This is simply a place we don’t think about pet hair getting into, but it is well-known for causing plumbing clogs and set-backs in homes with pets. For this reason, it is important to do what’s necessary to keep pet hair out of your plumbing pipes and drains.

There are a few easy methods that have been proven to do the trick when it comes to keeping pet hair out of the drains, and out of your home’s plumbing system. Fortunately for all of us, these methods are not just easy, they are inexpensive too! And the best part is, you can get started today! Continue reading to learn how to avoid dog and cat hair in your plumbing, and what to do if you suspect your pipes are clogged.

Open Drains and Exposed Pipes

If you have exposed drains or pipes in your home, be sure to block access to them to prevent pet hair in your plumbing, as well as, damage to your pipes. Some dogs and cats see exposed plumbing pipes or drains as toys, and they can potentially cause them structural damage. But most often, the open or exposed drain pipe can be vulnerable to pet hair exposure. Use furniture and other set-ups to block pets from accessing these exposed areas in your home.

Drain Strainers

If you do not already use drain strainers, you should strongly consider buying some for your sinks, tubs, and showers. And this is especially true for homes with dogs. If you are a DIY pet groomer, and bathe your precious pup in the sink or tub at home, you will greatly benefit from drain strainers. These little strainers keep human and pet hair out of plumbing pipes, which in turn reduces the chances of clogs and costly repairs. They also block other foreign objects that shouldn’t go down the drain, like dental floss, razors,
jewelry, and more.

Toilets

Many people who groom their pets may be tempted to flush the excess hair down the toilet as a quick and easy means of disposal. But this is not good for the home’s plumbing. In fact, flushing hair down the toilet can cause plumbing issues overnight. Yes, the toilet is so close when you are cleaning out the pet brush or emptying the handheld vacuum cleaner; but it is an easy fix that can come with some costly consequences in terms of plumbing repair. Just stick to throwing pet hair away in the trash can; after all, it is biodegradable and eco-friendly!

If you suspect your plumbing system is experiencing issues, call a licensed plumber for professional service you can trust. It is highly beneficial to catch a small problem early on before it can turn into a large costly one. A professional plumber can provide this service, as well as, preventative maintenance tips to avoid future plumbing problems.

Weilhammer Plumbing Co. Inc.

Weilhammer Plumbing Company 317-784-1870

Call Weilhammer Plumbing Co. Inc. at 317-784-1870 when you need a professional master plumber in Indianapolis, Indiana. Master plumber, Mark Weilhammer, is happy to answer your questions about your plumbing problems and concerns. We offer residential and commercial plumbing repair services, including water heaters, water softeners, boilers, sump pumps, septic systems, and more, all at the fairest price in town! Call 317-784-1870 for affordable plumbing services in Indianapolis and its surrounding counties.

Home Plumbing Maintenance Tips

Posted on September 20, 2014 by weilhammerplumbing

Indianapolis Plumbing Repair 317-784-187

In our current economy, budget-awareness is no stranger to most homeowners. Many people who own real estate, residential or commercial, are operating on a stringent financial plan. When a family is struggling to pay the bills and keep food on the table, it is easy to ignore or skip certain plumbing and home maintenance needs. In this blog, we will touch on cost-effective ways for homeowners to implement necessary plumbing maintenance services in order to keep their property protected.

Although some plumbing problems call for the services of a trained and licensed Indianapolis master plumber, there are several do-it-yourself methods for plumbing maintenance and repair. Continue reading to learn some budget-management options and tips for plumbing problems and common home plumbing issues.

Clogged Toilets

Most clogged toilets can be fixed with a few pumps of a standard plunger. Now we have all probably used this device once in our lives, but for those who are unfamiliar, simply insert the plunger, rubber-side down, into the toilet bowl and proceed to pump or jab the opening until the contents of the bowl flush. Do not attempt to flush the toilet while plunging; instead, plunge a few times, then flush, and then repeat if necessary. For major toilet repairs, it is highly recommended to hire a licensed plumber for proper service. If you need fixtures installed or replaced, it is wise to also use a master plumber. The plumbing components of a home can be very complex and complicated, and a homeowner can risk adding to the damage if they attempt to install their own fixtures. If you need a toilet replaced, call a professional. It is worth the money in the long run.

Clogged Drains

For drains that just don’t seem to rid the water as quickly as they used to, you can purchase inexpensive drain-cleansers and products at your local store. Some of these products actually come with a “drain snake” that allows you to manually unclog a drain, then pour the solution in after to clear it completely. A snake looks like a long perforated wire that is inserted vertically into a clogged drain. If a products does not come with a snake, simply cut and bend a wire hanger. Once inserted, simply pull out slowly, removing hair, soap residue, and more. These products are fairly inexpensive, and most are pretty effective. Be sure to follow all directions carefully because some can be hazardous if ingested or comes into contact with the eyes, and others can be corrosive to surfaces and counters.

Lead By Example

Teach your kids responsible plumbing usage and lead by example. Teach them about proper toilet practices; such as using an appropriate amount of toilet paper, and not flushing large or foreign objects down the toilet. This can greatly prevent toilet overflows and burst pipes that can lead to costly repairs and potential replacements. Also, teach your children how to use the garbage disposal responsibly, as well as, drain care, water pressure management, and more. The more they know, the more you can stop plumbing complications at home.

Weilhammer Plumbing Co. Inc.

Weilhammer Plumbing Indianapolis Indiana 317-784-1870

Call 317-784-1870 and speak with master plumber Mark Weilhammer, owner and operator of Weilhammer Plumbing Co. Inc. in Indianapolis, Indiana. We offer a wide selection of plumbing services for residential and commercial properties. We have been in business since 1901, and continue to be a trusted Indianapolis plumbing company to this day! We offer the most competent plumbing services at the most competitive prices in town. Call 317-784-1870 to learn more about our plumbing repair services in Indianapolis, IN today!

Water Softener Buyers Beware of Cheap, Sub-Standard Brands on the Market

Posted on August 28, 2014 by weilhammerplumbing

Water Heater Repair and Service 317-784-1870

Okay folks, here it is; the BEST water softener brand in Indiana is the CLACK ON DEMAND. Our services provide installation for a NEW METERED 48,000 Grain Unit with a 2-Year LABOR Warranty and 5-Year Control Warranty for less than $1300 total! Just something to keep in mind if you are experiencing problems with your current water conditioning system. No matter how difficult and time-consuming, we can always figure out a way to get soft water for our clients at a price they can afford.

Best and Most Reliable Water Softeners

As just mentioned, CLACK ON DEMAND is a fantastic brand for water conditioners. The CLACK Valve is probably the most user-friendly water softener in the country. CLACK is simply the most advanced valve on the market right now. It substantially exceeds all other brand valves; including FLECK, CULLIGAN, AUTOTROL, and even KINTETICO.

NOT RECOMMENDED IN A MILLION YEARS: Whirlpool, GE, SEARS, and Morton Water Softeners

The above, non-recommended, brands are difficult to repair because not many plumbers will take on the responsibility. They know, just as we do, that there is no chance for them. We will not take your money and make empty promises for repair when it simply isn’t possible or highly unlikely. Cheap bargain brand water softeners typically have poor quality filter resin that is only made to last around 5 years in city water (hard water). On the contrary, CLACK ON DEMAND water conditioners retain mineral resin that is heavy-duty, long-lasting, and double the quality of bargain brand systems.

TAKE NOTE: From my experience as a master plumber, we have seen water heaters with excessive lime and sediment buildup from the city’s water. Think of it this way, a clean gas water heater costs around $300 per year to heat a property’s water; however, a dirty lime-ridden unit costs four times as much per year! This is one reason why water softeners are a smart investment. They essentially pay for themselves because they prevent this kind of mess and annual costs.

EXAMPLE: In 2008, I visited a client that owned a worn-out CULLIGAN water softener and needed a replacement. CULLIGAN quoted nearly $2000 for a GOLD SERIES replacement unit. Here at the WEILHAMMER PLUMBING COMPANY, we installed a brand new CLACK unit for less than $1100, instead! See the difference?

WARNING!!

NEVER fall victim to “home show”, “high-pressure”, or “fly-by-the-night” salesmen, or conmen as I like to call them. They try to sell you 15 year old fancy-sounding equipment for up to $6,000! WE hear this complaint from customers all too often. Do not get swindled into buying old, over-priced equipment from home shows or conventions. Remember, we can install a brand new 48,000 grain CLACK unit for less than $1300.

Now let’s talk salt-free. Or better yet, just read these customer reviews and decide for yourself:

Salt-Free Water Conditioner Customer Review #1

Salt-Free Water Conditioner Customer Review #2

Weilhammer Plumbing Company – Indianapolis, IN

Weilhammer Plumbing Company 317-784-1870

Call Weilhammer Plumbing Co. at 317-714-0759 for reputable and trustworthy plumbing services in Indianapolis, Indiana. We have been a family owned and operated plumbing company for more than 112 years! This means we have earned the utmost respect and the trust of our Hoosier communities over the past several decades. We are state licensed plumbers that offer the most competitive plumbing prices in the state. We only want the best for our customers, so we retain the latest technologies for plumbing repair, and only the highest quality products and appliances. Call us today at 317-714-0759 for more information about plumbing repair and service in Indianapolis, IN and its nearby counties.