Water softener regeneration is the process of removing accumulated minerals from the water softener unit. This is typically done with a salt-based solution, which helps to break down the mineral deposits and flush them out of the system. Regeneration can be performed manually or automatically, depending on the type of water softener unit you have. Automatic regeneration is generally the more convenient option, as it does not require you to remember to perform the process on a regular basis. However, manual regeneration may be necessary if your water softener unit is not working properly.

Continue below to learn more about water softener regeneration, including the difference between manual and automatic regeneration.

Regeneration Cycles in Water Softeners

Water softener regeneration is the process of removing hardness-causing minerals from the water.Most water softeners regenerate at night, during periods of low water usage. This is because the process of regeneration uses a lot of water and can cause disruptions in service if done during peak hours. The specific time that your water softener regenerates will be set by your local water company or plumber.

The two most common methods for regenerating a water softener are manual and automatic:

Manual regeneration involves manually initiating the process by adding salt to the unit. This method is often used when water hardness is not too high, and the unit does not need to be regenerated too often.

Automatic regeneration is initiated by a timer or controller, which begins the process automatically based on preset intervals. This method is often used when water hardness is high, and the unit needs to be regenerated more frequently.

Pros and Cons

There are pros and cons to both manual and automatic regeneration. Manual regeneration is typically less expensive and easier to do, but it requires more frequent attention. Automatic regeneration is more expensive and may require more maintenance, but it is more convenient and often provides better results.

When choosing a water softener regeneration method, it is important to consider the type of water hardness, the frequency of use, and the budget. Whichever method is chosen, regular maintenance and attention will be required to keep the unit functioning properly. Speak with a professional Indianapolis water softening company for advice on which type is best for your home or business.

Hard Water Treatment

If you have hard water, you may notice that your plumbing fixtures and appliances are covered in a white, powdery substance. This is called lime scale, and it is caused by the high concentration of minerals in your water. While lime scale is not harmful to your health, it can cause significant damage to your plumbing system and reduce the efficiency of your appliances. A water softener unit can help to remove the minerals from your water, which will prevent lime scale from forming. Be sure your water softener remains in good condition with routine maintenance and regular care.

Are you interested in speaking to a licensed professional to learn more about water softeners and your soft water needs? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation for saltless water softeners in Indianapolis, Indiana. We serve residential and commercial clients.

Related Posts:

How Does a Water Softener Eliminate Hard Water?
How Hard Water Problems Can Cost You Money
FAQS About Water Softeners and Hard Water