How to Remove Limescale in 7 Easy Steps

If you’ve ever noticed limescale buildup in your sinks, tubs, or other water fixtures, then you know just how hard it can be to remove. Limescale is caused by hard water and can be stubborn and difficult to get rid of. But with the right tools and techniques, limescale removal doesn’t have to be a daunting task. In this blog post we will discuss 7 easy steps for removing hard water scale from any surface quickly and effectively so that you can enjoy sparkling clean fixtures again!

Call 317-784-1870 For Hard Water Removal in Indianapolis
Call 317-784-1870 For Hard Water Removal in Indianapolis

Hard Water Scale Removal 101

Step 1: Gather Your Supplies

Before you start limescale removal, make sure you have all the necessary supplies on hand. You’ll need a limescale remover – either an acidic solution or a limescale-specific product – as well as protective gloves for safety. Additionally, you may want to have some sponges, towels, and brushes handy to help with the task.

Step 2: Protect the Area

Once your supplies are gathered, it’s time to protect the area from damage. Cover any nearby surfaces with plastic or newspaper and use tape to secure them in place. This will help reduce staining and potential damage from hard water scale remover splashes or drips.

Step 3: Apply the Limescale Remover

Apply the hard water scale cleaner according to the product’s instructions. Make sure to wear gloves when applying limescale remover and cover yourself with protective clothing if necessary. Leave limescale remover on for the allotted time specified by the product, usually anywhere from 10 minutes to an hour.

Step 4: Scrub Away Limescale Residue

Once limescale remover has been applied, it’s time to scrub away any limescale residue left behind. You can use a sponge, brush or other tool depending on what works best for your particular surface. Be careful not to scratch or damage any surfaces you are cleaning. 

Step 5: Rinse the Surface

Once limescale residue has been scrubbed away, use a wet cloth or towel to rinse any remaining limescale remover and hard water scale off of the surface being cleaned. Make sure to thoroughly remove the limescale product from all surfaces.

Step 6: Dry the Surface

Once limescale removal is complete, dry the surface with a clean towel or cloth. This will help prevent any limescale buildup in the future.

Step 7: Remove Any Residual Limescale Buildup

If there is still limescale residue left behind, you may need to repeat steps 3 to 6 until it is completely gone. You can also use a limescale descaler to help remove hard water scale buildup from hard-to-reach areas.

Conclusion

There you have it – 7 easy steps for limescale removal! Removing limescale doesn’t have to be a daunting task when you know how. With the right tools and techniques, hard water scale removal can be quick and effective so that you can enjoy sparkling clean fixtures again!

Want to Prevent Hard Water Problems in the Home?

Hard water can cause problems for property owners and renters due to its tendency to corrode pipes, reduce water quality, and increase the amount of soap or detergent needed for cleaning. Fortunately, there are measures that can be taken to prevent hard water from creating these issues. Most significantly, water softeners are designed specifically to minimize the adverse effects of hard water. The installation of a water softener will significantly reduce or even altogether eliminate the problems caused by hard water. You should research and invest in a quality water softener system that is tailored to your specific hard water treatment needs. This will provide the best protection and performance.

Taking proactive measures such as water softener installation is necessary in order to protect against hard water damage and ensure optimal water quality. Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. At our plumbing company, we serve both residential and commercial clients with top-notch service.

Related Posts:

How to Test Your Home’s Hard Water Levels
What You Need to Know About Hard Water Removal for Wells
The Ultimate Guide to Water Softener Replacement

How to Test Your Home’s Hard Water Levels

Do you suspect that your home’s water is hard? If so, it’s important to know for sure. Hard water can be a nuisance and even damage pipes and appliances if not addressed. Fortunately, testing your home’s hard water levels is an easy process that anyone can do with the right supplies. In this blog post, we’ll discuss why it’s important to test your home’s hard water levels and how you can do it yourself in just a few simple steps. We’ll also cover what to do after the results come back so you can make sure your family has safe, clean drinking water at all times. So, let’s get started!

For Hard Water Testing in Indianapolis, Call 317-784-1870 Today!
For Hard Water Testing in Indianapolis, Call 317-784-1870 Today!

The Hard Water Facts You Need to Know

The first step is understanding what hard water is and why it’s important to test for it. Hard water is water that contains high levels of minerals like calcium and magnesium, which can cause scale buildup in pipes, dishwashers, washing machines, and other appliances. As these minerals accumulate over time, they make it more difficult for your home’s plumbing and appliances to do their job efficiently. That’s why it’s important to test your home’s hard water levels regularly.

3 Step Hard Water Testing Process

Now that you know why it’s important to test for hard water, let’s discuss the process of testing. There are a few different ways to do this. You can purchase a hard water testing kit from a home improvement store, or you can hire a professional to come out and test the water for you. However, if you decide to do it yourself, here are the basic steps:

Collect a sample of water in a clean container. This should be taken from your faucet at full pressure and held in the container for at least 15 seconds.

Use a hard water testing kit to measure the amount of calcium and magnesium in the water. These kits are available from home improvement stores or online retailers, and they come with instructions on how to use them.

Compare the results of your test against the standards set by your local water authority. If the levels are higher than those set by your local water authority, then your water is considered hard, and you’ll need to take steps to address it.

Top Hard Water Solutions

Once you know the level of hardness in your home’s water, there are a few different options for addressing it. The most common one is installing a water softener, which reduces the amount of calcium and magnesium in the water by replacing them with sodium. You can also reduce hard water buildup on your appliances and pipes by using vinegar or other mild cleaning solutions.

By testing your home’s hard water levels regularly, you can ensure that your family has clean and safe drinking water that won’t cause any damage to your pipes and appliances. If you have any questions or need help testing or treating the hard water in your home, contact a professional soft water plumber in Indianapolis. They can help you make sure your water isn’t causing any damage and advise you on the best steps to take to make sure your family is safe. 

Ready to get your hard water problems under control at an affordable price? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. At our plumbing company, we serve both residential and commercial clients with top-notch service.

Related Posts:

What is the Hardness Level of Well Water?
How Hard Water Problems Can Cost You Money
How to Test for Hard Water Using an Empty Water Bottle

9 Simple Strategies for Reducing the Impact of Hard Water on Appliances

Have you ever wondered why hard water can cause so many issues with your appliances? From dishwashers to washing machines, hard water can wreak havoc on the inner workings of these expensive items. Fortunately, there are several strategies available for reducing the impact of hard water on your home appliances.

In this blog post, we will discuss nine simple strategies for softening hard water and protecting your appliances from its damaging effects. We’ll discuss topics such as installing a water softener, using detergents designed specifically for hard-water areas, and more. By following some or all of these tips, you should be able to reduce the amount of damage that hard water causes in your home!

Call 317-784-1870 For Indianapolis Water Softener Service Today!
Call 317-784-1870 For Indianapolis Water Softener Service Today!

Avoid Appliance Inefficiency With These 9 Hard Water Removal Tips

1. Install a water softener: One of the best and most effective ways to reduce hard water damage on your appliances is to install a water softener system in your home. Water softeners work by removing the minerals that cause hard water from the supply, leaving you with clean, soft water for all of your needs. If you live in an area where hard water is a problem, installing a water softener can be one of the best investments you make for your home and appliances.

2. Use detergents designed specifically for hard-water areas: There are several brands of detergent on the market that are specially formulated to work with hard water. These detergents contain special ingredients that help to reduce hard water’s damaging effects on your appliances.

3. Check the appliance’s water softening setting: Many appliances now come with built-in settings for hard water; if you have hard water, make sure to check the relevant settings in order to get the best performance out of your appliance.

4. Use a filter: If hard water is an issue in your area, you may want to consider using a filter on the incoming water supply. A good filter will help remove sediment, minerals and other contaminants that can damage appliances and reduce their effectiveness over time.

5. Clean regularly: Regularly cleaning your appliances can help reduce hard water damage and keep your appliances running smoothly. Use a soft cloth or brush to gently remove any buildup of hard water deposits from the surfaces of your appliance.

6. Check for leaks: Make sure to regularly check for leaks in any faucets, hoses or other plumbing fixtures connected to your home’s water supply. Leaks can often be hard to spot, so if you think you might have a hidden leak it’s worth calling a professional Indianapolis plumber to investigate.

7. Flush the system: If hard water is an issue in your area, it may be worthwhile flushing out the plumbing system every few months or so. This process helps to remove hard water deposits that can block the flow of water and damage your appliances.

8. Use a descaling product: If hard water is leaving visible signs of its presence on your appliances, there are special descaling products available that you can use to restore them to their former glory.

9. Regularly check your water softener: Finally, if you have a water softener installed in your home, make sure to regularly check it for signs of wear or damage. A malfunctioning water softener won’t be able to perform its job properly, leaving hard water deposits to build up and damage your appliances.

Remove Hard Water in Indianapolis Today

By taking these simple steps and following these nine strategies for reducing hard water’s impact on your home appliances, you can keep them running smoothly and efficiently. Remember that hard water is a common problem in many areas, and it can be hard to completely eliminate, but with the right precautions and maintenance, you should be able to reduce its negative effects on your appliances significantly.

If you’re dealing with any hard water problems, don’t despair. There are solutions available to help you keep your water clean and safe. Contact Weilhammer Plumbing Company at 317-784-1870 for trusted water softener sales, service, and installation in Indianapolis, Indiana. We serve residential and commercial clients.

Related Posts:

Easy Solutions for Dishwasher Residue Problems
How to Solve a Dishwasher Drainage Problem
How Your Water Meter Can Confirm Plumbing Leaks

How Does a Water Softener Get Rid of Water Hardness?

If you’ve ever had hard water, you know how annoying it can be. Water softeners are designed to remove the minerals that cause hard water, making it much easier to use. Continue below to learn more about water softeners, including what they do, how they eliminate hard water, installation information, and post-installation maintenance tips.

Call 317-784-1870 For Professional Hard Water Treatment in Indianapolis Indiana.
Call 317-784-1870 For Professional Hard Water Treatment in Indianapolis Indiana.

Hard Water Facts You Need to Know

Hard water is water that contains a high concentration of minerals, typically calcium and magnesium. These minerals can make water feel sticky and can be deposited on pipes and fixtures. Over time, these deposits can build up and cause serious problems. Soft water, on the other hand, is water that has been treated to remove these minerals. As a result, it’s much gentler on piping and fixtures and doesn’t leave behind those annoying deposits.

Water softeners work by exchanging the minerals in hard water for other ions, typically sodium or potassium. This process is known as ion exchange. Inside the water softener is a tank filled with small resin beads. These beads are coated with sodium or potassium ions. As hard water passes through the tank, the mineral ions are attracted to the beads and bind to them. This leaves behind water that is softer and free of harmful minerals.

If you’re considering a water softener for your home, there are a few things you should keep in mind:

First, water softeners require a regular supply of salt to replenish the sodium or potassium ions that are exchanged during the ion exchange process.

Second, water softeners can take up a fair amount of space, so make sure you have enough room to accommodate one.

And finally, water softeners can be pricey, so be sure to do your research before making a purchase. But if you’re tired of dealing with hard water, a water softener could be just what you need.

Water Softener Installation

Installing a water softener is a great way to improve the quality of your home’s water. Hard water can cause a variety of problems, including making it difficult to clean dishes and clothing, and causing mineral buildup in plumbing fixtures. A water softener will remove these minerals from your water, making it softer and easier to use.

There are a few things to keep in mind when installing a water softener:

First, you’ll need to choose the right unit for your home. There are a variety of water softeners on the market, so it’s important to do your research to find one that will work well for your needs. Second, you’ll need to install the unit according to the manufacturer’s instructions. This is typically not a difficult task, but it’s important to follow the instructions carefully to ensure that the unit is installed correctly.

Finally, you’ll need to maintain your water softener according to the manufacturer’s recommendations. This includes periodically adding salt to the unit and occasionally descaling the unit to remove mineral buildup. By following these simple steps, you can ensure that your water softener will provide years of trouble-free operation.

More Advice for Maintaining a Water Softener

As any homeowner knows, there are a lot of things that need to be done to maintain a home in good condition. One of the most important, but often overlooked, systems in a home is the water softener. A water softener is used to remove minerals from water, making it softer and easier on everything from dishes to clothing. While water softeners are fairly low maintenance, there are still some things that need to be done to keep them running smoothly.

Here are a Few Tips for Water Softener Maintenance:

☑ Have the unit serviced regularly by a qualified technician.
☑ Keep the brine tank full of salt
☑ Clean the unit according to the manufacturer’s instructions

By following these simple tips, you can ensure that your water softener will provide years of trouble-free service.

Upgrading or replacing your water softener has never been easier! Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. At our plumbing company, we serve both residential and commercial clients with top-notch service.

Related Posts:

How to Tell if Your Home Could Use a Water Softener
How Hard Water Problems Can Cost You Money
FAQS About Water Softeners and Hard Water

The Negative Effects of Living With Hard Water

Hard water is a very common problem that affects many homeowners. It can cause a number of problems, including dry skin and hair, as well as clogged pipes and plumbing fixtures. Hard water can also make it difficult to clean dishes and laundry. A water softener can help to reduce the negative effects of hard water.

Continue below to learn more about the negative effects of living with hard water, and more importantly, how to quickly solve a hard water problem at home.

Hard Water Treatment Company Indianapolis IN 317-784-1870
Hard Water Treatment Company Indianapolis IN 317-784-1870

What is the Problem With Hard Water?

Hard water can cause a number of problems in the home, from dingy laundry to spots on dishes and even decreased soap suds. This is because hard water contains high levels of minerals, including calcium and magnesium. These minerals can build up over time, causing scale buildup on fixtures and appliances. Hard water can also make it difficult to get suds when using soap, which decreases its effectiveness.

Hard water contains high levels of minerals, such as calcium and magnesium. These minerals can cause a variety of problems, including but not limited to:

Soap Scum Build-Up: Soap scum is a sticky residue that can build up on your fixtures and appliances. This build-up can be difficult to remove and can lead to staining.

Water Spots: Hard water can leave unsightly spots on your dishes, glasses, and other items. These spots are caused by the minerals in hard water and can be difficult to remove.

Clogged Pipes: Over time, the minerals in hard water can accumulate in your pipes and cause them to become clogged. This can lead to reduced water pressure and can eventually cause your pipes to burst.

Appliance Failure: Overtime, hard minerals like calcium, iron, and magnesium can clog up the internal lines of your plumbed appliances, resulting in poor energy efficiency, breakdowns, and premature replacements.

Signs of Hard Water

If you suspect that you have hard water, there are a few things that you can do to confirm it. First, you can check your water bill. If you see that you’re paying higher than average water bills, this could be an indication of hard water. Second, you can look for signs of hard water around your home, such as soap scum build-up or water spots. Finally, you can have your water tested by a professional hard water removal company in Indianapolis.

The Best Method of Hard Water Removal

A water softener is a device that removes these minerals from your water, leaving you with softer water that is easier on your home and your belongings. There are many benefits to using a water softener, including extending the life of your appliances, making it easier to clean your clothes, and improving the taste of your water. If you have hard water, a water softener can make a big difference in your home.

Would you like to upgrade or replace your water softener? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. We serve residential and commercial clients.

Related Posts:

How to Tell if Your Home Could Use a Water Softener
How Hard Water Problems Can Cost You Money
FAQS About Water Softeners and Hard Water

How Does a Water Softener Eliminate Hard Water?

Hard water is water that contains high levels of minerals, typically calcium, iron, and magnesium. These minerals can cause a variety of problems in your home, from hard-to-clean fixtures to decreased efficiency of appliances. Hard water removal is necessary to protect your home and keep everything running smoothly. Water softening is the most common solution to hard water problems.

Water softening systems remove the hard water minerals from your water, leaving you with soft water that is easy to use and won’t damage your fixtures or appliances. If you have hard water, a water softener can be a great way to improve your home’s water quality. It can also save you money by prolonging the life of your plumbing and appliances.

Continue reading to learn how a water softener works, including what it does to remove hard mineral ions from water.

Water Softening Service Indianapolis Indiana 317-784-1870
Water Softening Service Indianapolis Indiana 317-784-1870

Hard Water Removal By Means of Water Softening

A water softener is a device that’s installed on your home’s water supply line. It works by removing minerals from hard water, like calcium and magnesium, which can cause build-up on fixtures and appliances. A water softener also helps to extend the life of your plumbing by preventing corrosion.

There are two types of water softeners: salt-based and salt-free. Salt-based water softeners use sodium to remove minerals from hard water. Salt-free water softeners use a process called ion exchange to remove minerals. Both types of water softeners are effective at reducing mineral buildup in your home.

One of the main components in a water softener is the resin beads. These beads are what actually remove the hard minerals from the water. The beads are made of a synthetic polymer that has a very strong attraction to ions. As water passes through the resin beads, the hard minerals are attracted to the beads and become trapped on them.

The beads can then be flushed with a salt solution to remove the minerals and regenerate the beads so they can be used again. Resin beads are very strong and durable, but over time they can become clogged with minerals and need to be replaced. If you have hard water, it’s important to check your resin beads regularly to make sure they are still working properly.

Conclusion

If you’re concerned about hard water in your home, contact an Indianapolis soft water treatment professional to discuss your options for hard water removal. They can help you choose the best water softening system for your home and needs, so you can enjoy the benefits of soft water.

Thanks for reading! I hope this gives you a better understanding of how water softeners work. If you have any questions, feel free to leave a comment below. Or contact Weilhammer Plumbing Co. Inc. at 317-784-1870 for professional water softener sales, installation, service, and repair in Indianapolis, Indiana. We serve residential and commercial customers, and service all make and model water softeners, including saltfree water softeners.

Related Posts:

Best Salt Options for Residential Water Softeners
Are Water Softeners Worth the Cost?
Top 3 Ways to Soften Hard Water

How to Ease the Frustration of Washing Dishes With Hard Water

If you are stuck washing dishes with hard water, you will be happy to learn that there are a few things you can do to ease the frustrations that come along with the mineral deposits and cloudy haze it leaves behind. Continue reading to review 4 effective ways to reduce the effects of hard water on, whether you’re using a dishwasher or washing by hand.

Water Softeners Indianapolis Indiana 317-784-1870
Water Softeners Indianapolis Indiana 317-784-1870

How to Reduce Mineral Deposits on Dishes

Nothing is more frustrating than carefully scrubbing and rinsing dishes only for them to be covered in white spots and fog once they’ve dried. It can be even more frustrating to put dishes through an automatic dishwasher only for them to come out with evidence of mineral deposits. After all, a dishwasher is meant to do the job for you! When you wash your dishes, you expect them to look clean, but hard water can deny you that right. Fortunately, with the right tools, there are plenty of remedies for hard water spots and mineral deposits on dishes. This is especially good news for those who cannot afford to purchase a water softener or upgrade their current unit.

Store-Bought Rinse Aids

There are several commercial rinse aids and rinse agents available at your local department store. These liquid rinse agents contain a version of acid that prevents the formation of mineral deposits on dishes. Dishwashers will release the liquid rinse aid in the final rinse cycle, but if you are not using a dishwasher, you can simply soak your dishes in a sink filled with water and mixed with some rinse aid for the same result. You can expect to pay anywhere between 4 to 8 dollars for a quality commercial rinse aid.

Citric Acid

The acid component within commercial rinse aids is the primary additive that abates hard water deposits on dishes. You can skip purchasing a commercial rinse aid and instead, use food-grade citric acid granules to wash dishes. This will give you the same effects, but likely at a cheaper price. When washing dishes by hand, add 1 tablespoon of citric acid granules to your sink water. In a dishwasher, pour 1 to 2 tablespoons of ] citric acid granules into the primary detergent dispenser. Then put your regular dishwashing detergent in the secondary dispenser.

Vinegar

If you are not interested in purchasing any products to assist in your hard water dishwashing fight, consider using household products like distilled white vinegar. The acidity in vinegar is a natural deterrent for hard water mineral deposits on dishes. When washing dishes by hand, simply add 1 cup of distilled white vinegar to your rinse water. If you are using a dishwasher, add the vinegar to the dispenser designated for rinse agents. If your dishwasher doesn’t have a dispenser for rinse aids, simply pour a cup of vinegar at the bottom of your dishwasher before starting the cycle.

Water Softening is the Best and Most Effective Solution to Hard Water Dish Problems

A water softener is the most effective solution for avoiding any of the negative effects of hard water. Hard water doesn’t just affect your dishes, it also affects several other important elements of your home or business, including plumbing appliances like water softeners and water heaters. If you think you cannot afford a water softener or a water software upgrade, think again! With the right Indianapolis water softener plumber in your corner, you can find budget-friendly water softening solutions that meet your hard water removal means.

Are you ready to learn your affordable options for commercial or residential water softening? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. We serve residential and commercial clients.

Related Posts:

How to Solve a Dishwasher Drainage Problem
Top 3 Ways to Test For Hard Water
Are Water Softeners Worth the Cost?

Your Home Needs a Water Softener If It Shows These Signs

There are many adjectives you want to be able to use to describe your home’s water, like wet, clear, fresh, odorless, and tasteless. Likewise, there are several more that you don’t want to use to describe the water in your home, like smelly, cloudy, discolored, or unpalatable. So, how do you describe your water? If your water description is on the negative side, you may have a hard water problem. The best way to solve a hard water problem is by installing a quality water softening system.

Not sure if you are ready for a water softener? Continue reading to learn some common signs that indicate your home is in need of a water softener.

Water Softener Company Indianapolis Indiana 317-784-1870
Water Softener Company Indianapolis Indiana 317-784-1870

Signs of Hard Water in the Home

Although there are several signs, large and small, that indicate your home is experiencing a higher level of water hardness. However, by examining these four top signs of hard water in the home, you can quickly determine if water hardness is indeed a problem in your house.

Sink and Tub Stains

Take a look at your bathroom sinks, shower, and tub basin. Do you see rust-like staining on the porcelain or around the drainage hardware? If so, this is likely due to hard water. You see, hard, water is hard because it contains hard mineral ions and dissolved metals. When these come into contact with your porcelain bathroom fixtures, it will begin to permeate and corrode from within, causing the telltale staining you see.

Scale Buildup

Perhaps the most blatant sign that your home is experiencing. Water hardness is limes buildup. Take a look at your shower fixtures, your faucets, plumbing hardware, and similar fixtures. Do you see a white, flaky, crusty material, forming around them? This is known as scale, and it is a mixture of hard mineral ions that precipitate out of hot water and stick to whatever surface they come into contact with. Although you can treat scale as it comes, it will never fully go away unless you first fix the hard water problem.

Increased Utility Bills

Do you keep track of your water and energy bills each month? If you’ve noticed that they’ve increased, even though you’ve not done anything differently, do not chalk it up to inflation or the current economic condition. It might be caused by scale buildup inside your water heater tank and similar plumbing appliances, like the washing machine and dishwasher.

Scale buildup inside of your plumbing pipes and appliances causes your system to work harder just to perform the same job that they have always performed. As a result, your appliances use more energy, which cost you more money. Scale buildup inside of the water heater tank can also cause you to wait longer for your shower or bathtub to heat up. This increases your energy bill and your water bill.

Dingy and Faded Clothing  

Have you been scratching your head while switching detergents and fabric softeners over and over again, but still your laundry feels dry and looks faded? Your problem could be hard water. You know that scale that we’ve been talking about? Well, it can also affect the quality of your clothing in any other upholsterer items you wash in your washing machine. It can also affect washing machine performance, namely by not properly rinsing out the detergents and fabric softeners from your laundered items. If your clothes feel sticky or greasy, it could be due to this.

Are you ready to learn why a water softener is the best choice for your home or office? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener sales, service, and installation in Indianapolis, Indiana. We serve residential and commercial clients.

Related Posts:

Easy Solutions for Dishwasher Residue Problems
How to Test for Hard Water Using an Empty Water Bottle
Are Water Softeners Worth the Cost?

How Hard Water Problems Can Cost You Money

Living with hard water will pose all sorts of problems around the house, from laundry and bathing to dish washing, skincare, hair care, plumbing, appliances, and much more. But what many homeowners do not realize is that hard water can also affect the bank account, especially if they’ve been living with hard water for a very long time.

Continue reading to learn how hard water problems can cost you money, and how a water softener can solve this issue and it improve your overall quality of life.

Indianapolis Water Softener Services 317-784-1870
Indianapolis Water Softener Services 317-784-1870

What is Hard Water?

Hard water comes from the ground. It starts as rainwater, which is naturally soft; then it permeates the ground and seeps deep within sand, soil, and rock. As its saturating the ground, rainwater collects mineral deposits, such as magnesium and calcium, which cause water to be hard. Hard water is measured in grains per gallon. The more salt minerals water contains, the “harder” the water is said to be. Depending on local water treatment centers and plumbing developments, the degree of hardness in a person’s water will differ. 

The Cost of Living With Hard Water

When you are dealing with a hard water problem in your house, you may face additional expenses that you will have to pay for out-of-pocket. Hard water can cause your appliances to break down because sediment will accumulate within their systems causing them to work in overdrive. This leads to premature appliance placement is very costly. Furthermore, because your appliances are working harder, your utility bills are going to skyrocket, which means you are paying more for energy and electricity and water each month.

Another way hard water will cost you money is in terms of water consumption. Your water bill will also skyrocket because you will have to use more water to rinse things, such as cleaning your clothes or washing your hands. Because hard water doesn’t lather well, you’ll take longer to rinse your shampoo and conditioner of your hair, therefore using more water. The same theory applies to washing your hands or washing your clothes in the laundry machine.

In a less obvious way, and perhaps less impactful, hard water can also cause you to spend more money on things like shampoo, conditioner, hand soap, dish soap, laundry detergent, and similar cleaning supplies since hard water makes it more difficult to get things clean. As a result of this, you tend to use more of these items each time.

How to Solve a Hard Water Problem

A quality water conditioning system, such as a conventional water softener, is the best solution for solving a hard water problem, whether at home or your place of business. A water softener eliminates all of the hard mineral ions in your water supply that makes water hard, such as iron, magnesium, calcium, and possibly heavy metals like lead and mercury. Talk to your local Indianapolis plumbing company for advice on which water softener is best for your home or office.

Are you ready to install a new water softener or have your current water softener repaired? Contact Weilhammer Plumbing Company at 317-784-1870 for water softener services in Indianapolis, Indiana. We serve both residential and commercial clients and offer free advice anytime!

You Should Also Read:

5 Signs of a Hard Water Problem
The Top 3 Advantages of Owning a Water Softener
Do Not Make these Common Plumbing Mistakes as a New Homeowner

Indianapolis Indiana Master Plumbers 317-784-1870
Indianapolis Indiana Master Plumbers 317-784-1870

The Best Way to Solve Your Hard Water Problems at Home

There are all types of misconceptions, home remedies, and theories surrounding the treatment of hard water. Although hard water cannot harm or kill you, it is undesirable when compared to the advantages of softened or conditioned water. Not only does softened water improve the look and feel of our skin, hair, and nails, it’s healthier for our teeth, reduces marks and spots on dishes, lessens pipe and plumbing erosion, and much more. When it comes to treating hard water, the best method to choose is to install a quality water softening system.

Continue reading to learn more about hard water removal, and why water softeners are the best choice for solving poor water quality issues.

Limescale , cloudy water, and spotty fixtures are just a few possible consequences of having hard water.

The Basics Behind Hard Water Removal

There are several signs that point toward a hard water presence.  Spots, streaks, and white residue on your dishes are some of the most common and primarily noticed signs of hard water in a home.  Other hints that suggest hard water include dry skin, dingy laundry, film and scale buildup, funny-tasting coffee or tea, increased utility bills, and more. Hard water is water that has excessive traces mineral salts, such as magnesium and calcium ions.

Such deposits and solids accumulate within the water by passing through soil, rock, and sand. Hard water ranges in hardness on a scale of one through ten. The degree of hardness is measured in grains per gallon. To get rid of these minerals, one must install a water softener, as mentioned before.  Always call a reputable and licensed plumber to install, clean, or repair your water softener.

What to Expect After Installing a Water Softening System

Although a water softener can be the solution you are looking for when it comes to hard water removal, keep in mind that it is likely to increase your water usage, resulting in slightly higher water bills. Also, your electric bill will slightly increase as well because the water softener operates on electricity. The important factor to remember is that these extra costs are small compared to the benefits a family enjoys from soft water. Keep in mind the advantages of owning a water softener and how it drastically improves the appearance of your skin, clothing, dishes, drinks, and more. More importantly, it reduces lime and scale buildup within your plumbing, reducing deterioration and expenses repair costs.

How to Resolve Your Hard Water Problems in Indianapolis, Indiana

Call Weilhammer Plumbing Co. Inc. at 317-784-1870 to speak directly with a licensed master plumber (License #106214) about your hard water problems. We provide a wide range of standard and master plumbing services for both residential and commercial properties, including certified plumbing services for all make and model water softeners in Indianapolis. We also offer free estimates, free plumbing advice, and even free haul-away for old plumbing appliances like water softeners, water heaters, sump pumps, and more. Request a free estimate, today.