Is your toilet taking too long to flush? Does the water take too long to fill back up in the bowl? Continue reading to learn the top 4 reasons why you might have a toilet that flushes slowly, and how to fix the problem within budget.
What is Your Toilet Flush So Slowly?
Lack of Tank Water
When there is not enough water in the toilet tank, it can cause weak flushing. When you flush your toilet, the water from the tank is being released into the toilet bowl. So, when there is an insufficient level of water in the tank, it decreases the force of the downward suction of the flush, and therefore affects the rate at which the water enters and clears. The most common reasons why you might be dealing with a lack of tank water include low water pressure, malfunctioning trip assembly, incorrectly adjusted fill valves, and similar internal component issues.
Defective Flapper Valve
Another reason why you might have a slowly flushing toilet could be due to a damaged or defective flapper valve. A flapper valve is that little rubber stopper at the bottom of your toilet tank. It opens and closes as you flush the toilet, releasing water into the bowl, and then stopping the release of water. If the valve becomes damaged, worn, or defective, it loses its ability to properly close off the opening between the tank and the toilet bowl. If you have a “running toilet” problem, it is likely caused by a worn or broken flapper valve. Fortunately, this is an inexpensive and easy part to replace.
Clogged drains can cause all sorts of problems within a home’s plumbing, including the toilet. If your drains are clogged, it can cause toilet flushing to slow down because the obstruction is slowing down the movement of water through your plumbing system. To prevent this, it is important to enlist a local Indianapolis plumber for annual home plumbing inspections and drain clearing services. You can also make your own homemade drain dissolving cleaner for under $10!
A more serious underlying culprit behind a slow flushing toilet is sediment accumulation around the jet holes. Jet holes are located under the rim of the toilet, and therefore commonly overlooked when it comes to routine cleaning. For this reason, mineral and sediment buildup are very common around these areas. When jet holes are obstructed by mineral accumulation, it can block the water flow coming through your toilet, therefore slowing down the flush. If this is your toilet issue, simply roll up your sleeves and give those jet holes a good scrubbing with distilled white vinegar and baking soda.
Are you looking for a skilled plumber who can help you with your toilet repair and replacement needs? Contact Weilhammer Plumbing Company at 317-784-1870 for professional plumbing services in Indianapolis, Indiana. We serve residential and commercial clients and offer free advice.
You Might Also Like:
Tips for Detecting Toilet Leaks
How to Fix a Running Toilet Handle
The Benefits of Dual Flush Toilets